Underwater Housing for Canon PowerShot G7X Mark III
AVAILABLE ON REQUEST
This product is no longer in stock
Warning: Last items in stock!
Our brand new ABS-PC blend provides strength and corrosion free performance year after year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light gray color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.
Drop-in camera loading makes this housing a breeze to set up and shoot. Good ergonomics are critical when you need to concentrate on composition, focus, and proper exposure. A large, curved control lever puts the shutter control right where you need it. The shutter lever can be extended using the optional Trigger Extension # 4077.93 for perfect spacing when using a right-hand handle.
The rotating controls are all operated intuitively via premium soft-touch knobs. Stainless steel, direct-drive rotating controls are virtually fail-safe and user serviceable and adjustable in a pinch.
All rear camera buttons are accessible by smooth action, hard anodized aluminum push buttons for reliable performance and easy maintenance. These controls are clearly labeled by laser engraving on the back of the housing that never fades or falls off.
The camera's large LCD screen can be seen clearly through the back of the housing.
Due to the position of the camera's flash in relation to its lens, the built-in flash is not suitable to illuminate photos under water. For the best color and clarity, we recommend adding a filter, strobe, or constant-on light.
Two ports are provided for the connection of up to two Ikelite-, SEA&SEA-, or Olympus-type fiber optic cords. Any Ikelite DS strobe may be connected using the Fiber Optic Converter # 4401.3 and Fiber Optic Cord # 4501. The AF35 strobe is not compatible with this housing.
The standard 3" diameter optical glass port accommodates the camera's full 24-100mm zoom range underwater.
67mm threaded macro wet lenses attach directly to the front of the housing's lens port for super macro photography. Compatible wet lenses include but are not limited to the INON UCL-165, Subsee Magnifier, Saga close up lenses, Nauticam CMC-1, and others.
There is no greater assurance than being able to see your camera and o-ring seal through the back of the housing. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Once the housing is closed you can see the o-ring form a solid, waterproof seal.
A spare 1/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional Vacuum Kit # 47012. A hand pump with gauge allows you to draw a vacuum on the housing to simulate water pressure and check for leaks prior to entering the water.
Every unit is water pressure tested to 200 feet (60m) before it leaves our facility in Indianapolis.
200 ft (60 m) depth rating
Controls for all camera functions except Flash pop-up button (flash must be extended when installing the camera in the housing)
Two built-in fiber optic ports
Slightly negative buoyancy in fresh water
1/4-20 threaded tray mounting with 3" (76mm) spacing
Weighs 2.3 lb (1061 g)
6.9 x 5.5 x 5" (175 x 140 x 127 mm)
3.0" diameter glass lens port supports full zoom range 24-100mm
|Camera model||Canon Powershot G7X Mark III|
DLM200 Underwater Housing for Fujifilm X-T3 Mirrorless Digital Camera...
200DL Underwater Housing for Canon EOS RP Mirrorless Digital Camera...
Underwater Housing for Canon PowerShot G7X Mark III AVAILABLE ON REQUEST
N100 0.36X WIDE ANGLE CONVERSION PORT WITH ALUMINIUM FLOAT COLLAR (INCL....
Nauticam NA-GFX50S housing for Fujifilm GFX 50S camera AVAILABLE ON REQUEST