Monday to Friday 9:00-14:00 and 16:00 to 19:00
Sea&Sea MDX-5D MARK III Housing 06174 View larger

Sea&Sea MDX-5D MARK III Housing 06174

06174

New product

Sea&Sea MDX-5D MARK III Housing for Canon EOS 5D Mark III

DISCONTINUED. NO LONGER IN PRODUCTION

More details

2 654,00 €

Add to wishlist

Monday to Friday 9:00-14:00 and 16:00 to 19:00

    Features
    Compatibility of the MDX-5D Mark lll ver.2 with CANON EOS 5Ds or 5DsR cameras
    Optical YS Converter/C can be built into the housing.
    Compatible with new Optical YS Converter/C1 for MDX housing which converts the camera’s TTL signal to a light signal. Both TTL and manual strobe photography is possible using a Fiber-Optic Cable II.
    * Fiber-Optic Cable ll is required when using the Optical YS Converter.
    * Optical YS Converter /C with serial number 00050 or less has to be downloaded with the latest firmware.
    Compatible with both the VF180 1.2x and VF45 1.2x viewfinders.
    By attaching the VF180 (#46112) or the VF45 prism viewfinders (#46111) (magnification ratio of 1.2x) to the housing, the magnification increases by 1.2x and entire field of view can be seen at the same time. Recommended for users committed to strict composition and focusing.
    Luminescence stickers. Major controls including levers and buttons will glow in dark environments.
    - Equipped with two fiber-optic cable sockets.
    - Equipped with one N-type (2-pin) connector and one accessory port.
    - The port lock is accessible from the outside of the housing.
    - The multi selector has been positioned on the right side of the rear case making it easily accessible while holding the grip and operating the camera.
    - Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to avoid electrolysis damage.
    - Sacrificial Zinc Anode (2 pieces)
    - Three mounting screw holes are located in the bottom of the housing.
    - Built-in leak sensor immediately alerts you to water ingress.
    Specifications
    - [Construction] Body: corrosion-resistant aluminum alloy (machined) Grip: corrosion-resistant die-cast aluminum alloy
    - [Depth rating] 100m / 330ft
    - [Dimensions (WxHxD)] 341 x198 x 140.5mm / 13.4 x 7.8 x 5.5 inches
    - [Weight] Approx. 3,155g / 111.3oz (Housing only)
    MaterialAluminum
    Camera modelCanon EOS 5D Mk III

Specials

New products