UH-OM5II
New product
AOi Underwater Housing for OM System OM-5 Mark II Camera (AVAILABLE ONLY ON REQUEST)
The AOI UH-OM5 II housing is specifically designed for the OM System OM-5 Mark II Camera.
Made of highly resistant polycarbonate is submersible up to 60 meters deep.
The housing includes a vacuum safety system which performs a pre-dive vacuum check. The system allows to confirm the hermetic seal of the case before the dive by means of the vacuum system and to control the seal of the case during the dive by means of the visual and acoustic humidity detector.
Lens Port system: AOI / Olympus OM-D Ports System
|
MODEL NUMBER |
AOI UH-OM5 II | |
| DESCRIPTION | Underwater Housing for OM System OM-5 Mark II Camera | |
| HOUSING COLOUR |
|
Translucent Grey |
| COMPATIBLE CAMERA MODELS |
OM SYSTEM OM-5 Mark II |
|
|
OM SYSTEM OM-5 and EM-5 III (must be Converted by CNK-002. Sold separately) |
||
|
MAIN MATERIAL |
Housing Body: Polycarbonate | |
| DEPTH RATING | 60 Meters | |
| LENS PORT SYSTEM | AOI / Olympus OM-D Ports System | |
| STROBE TRIGGER (WITH M & RC-TTL FUNCTIONS |
AOI STR-05 (Standard Accessory), or OLYMPUS FL-LM3 (Optional Accessory) |
|
| WATER LEAKAGE PROTECTION |
Built-in Vacuum Analyzation and Wet Detection System (VWS) |
|
|
BATTERY POWER |
Built-in Rechargeable Lithium Polymer Battery (3.7V) | |
| BATTERY CHARGING | By USB Charger DC5V, 0.5A (not included) Approx. 1.5 Hours for a full charge |
|
|
BATTERY OPERATION TIME |
Approx. 100 hours | |
| DIMENSIONS | 206.20mm (W) x 181.70mm (H) x 113.55mm (D) | |
| WEIGHT | On Land : Approx. 1340g (Only included LCD Monitor Hood and Lanyard) |
|
| STANDARD ACCESSORIES |
Conversion Kit (AOI CNK-002); LED Strobe Trigger (AOI STR-05) |
|
|
Body Cap / Storage Box for OM-D Mount Housing (AOI BC-01) |
||
|
USB Type-C Charging Cable (AOI USBC-02) |
||
|
LCD Monitor Hood (AOI LCDH-01) |
||
|
Spare O-Ring for Vacuum Valve Protection Cap x 1pc. (AOI SRVV-01) |
||
|
Vacuum Pump (AOI VP-02); Extended Shutter Release Lever (AOI ESL-02-GRY) |
||
|
O-Ring Remover (AOI ORR-02); Spare Main Seal O-Ring x 1pc. (AOI SOR-02) |
||
|
Spare Secondary Seal Ring x 1pc. (AOI SSR-02) |
||
|
Silicone Grease (AOI SIGR-5); Silica Gel (AOI SIGE-3) x 1pc. |
||
|
Lanyard (AOI LYD-01); Fiber Optic Cable Port Plug x 2pcs. (AOI OCP-PS-05)
|
||
| Material | Polycarbonate |
| Camera model | Olympus OM System OM-5 II, Olympus OM-5, Olympus OM-D E-M5 MkIII |
Get Social