English GB 
Español Camera housings
New products
Canon R6 X-2 INON
Brand:
Underwater Housing X-2 for Canon R6 (AVAILABLE ONLY ON REQUEST)
Ultra-accurate multi-functional built-in "TTL Converter"
The "TTL Converter" equipped as a standard feature, triggers INON strobe optically to enjoy fully automatic TTL. Exclusively developed for INON strobe based on its flash protocol to optimize its performance for underwater use. As an underwater strobe manufacturer, we successfully achieved the TTL Converter that provides constant, stable and highly accurate TTL exposure.
Strobe manual power is directly adjustable from camera
INON strobe manual power is directly adjustable from camera ranging between 1/64 and FULL at 1/3EV. increments. Useful when strobe is positioned away like on long strobe arm or when shooting with backlit technique.
12 shots/sec. continuous strobe firing (*5)
The TTL Converter fully supports [High speed continuous][High speed continuous+]. With ultra-accurate TTL shooting is now available for continuous shooting based on electricity stored in a capacitor6. INON TTL Converter strives efficiency in battery consumption not to miss precious moment and successfully provides more than 100,000 flash triggering only by two CR2032 coin batteries.
(*5)4 shots/sec.in [Continuous shooting], 12 shots/sec. in [Continuous shooting +].Tested by INON with fully charged camera battery.
(*6)Pause the strobe for a few minutes when taking more than 100 consecutive shots to avoid possible damage.When strobe output gets extremely low such as using S-TTL, open aperture or high ISO sensitivity, the strobe can shoot continuously until the battery gets flat but the strobe may be damaged by the load.
Built-in "Vacuum leak sensor" confirms housing sealing in 3 minutes
The "Vacuum Leak Sensor" ensures housing sealing by monitoring air pressure inside of the housing during leak check and warns accidental flooding with LED blinks and buzzer during diving. The onboard pressure sensor changes sensitivity for leak check and diving by variable control program (PAT. P).
The supersensitive pressure sensor detects even fine leakage. Not as like conventional leak sensors, it drastically shortens test time (from 30 seconds to 3 minutes). The sensitivity of the dive mode eliminates false alarm even when ambient temperature changes.
New S-MRS Port
Newly developed S-MRS (Magnetic Rotary System) controls focusing and zooming by magnetic attraction. The new S-MRS provides smoother operation with less play or rattle comparing to the previous model. By combining the EOS R6 Mark II with an RF lens, the MF Peaking function can also be used during full-time manual focusing. Together with the focus guide function, this enables ultra-precise focusing.
Optional two bright viewfinders
Optional viewfinders provide same magnification as camera’s viewfinder (1.0x) and extends its eye-point. Two options are available: “Straight Viewfinder Unit ll” or angled “45 degree viewfinder Unit II(*7)” to choose depending on shooting conditions.
(*7)Viewfinders with serial number D294600 or later are compatible with the "X-2 R6" housing. Earlier serial numbers are not compatible.
| Optical Cable Connector | 2 type Sea&Sea |
| TTL converter | Specifically designed for EOS R5/R6/R6 Mark II. Operates on two CR2032. |
| Leak Sensor (buzzer/LED) | "Built-in switch for battery level and function check. Operates on 1 x CR2032" |
| Size (without Accessories) | W x H x D: 205 x 181 x 123mm/8.0 x 7.1 x 4.8 inch (body only) |
| Weight (air) | 1,710 g/3.7 lb (body only) |
| Depth Rating | 75 m/246 ft. |
(Tray, handles and ports not included)
Get Social