DS230 Strobe Ikelite

Entry-level strobes dump raw light from a standard, straight flashtube to maximize guide number (brightness). These strobes require light diffusers and filters to soften and warm light and smooth out the sharp edges and banding effects. Most add-on modifiers dramatically cut light output and reduce the effective power of the strobe.

Lighting needs for underwater photography differ greatly compared to surface photography, so an off-the-shelf flashtube and reflector won't do. We have spent decades revising and perfecting our circular xenon flashtube for a perfectly gradated beam pattern and warm color temperature. A 5000K color temperature balances with available light underwater to provide richer coloring and deeper blue water backgrounds when shooting wide angle. Models' skin tones will look more natural and reds and oranges will pop with more vibrant color.

For times when an even wider angle of coverage is desired, the optional Dome Diffuser # 4069.2 is available to extend the spread of the light with only a half-stop reduction of apparent brightness.

A custom formulated ABS-PC blend make the strobe fundamentally corrosion-proof and over 1/2 lb (237 g) lighter than aluminum-body strobes.

 

Controls: 10 stops in 1/2-stop increments

TTL electrical connector: Ikelite electrical connector. In order to use the TTL function compatible only with Ikelite housings, it is necessary to install the appropriate Ikelite TTL converter between the strobe and housing (sold separately)

Optical connector: It does not have an optical connection but an optical signal converter is available for manual use only, not compatible with TTL (Ref. 4401.3 sold separately)

Aiming Light: 205 Lumen LED Spot

 

Color Temperature: 5000K

 

Coverage Angle: 120º

 

Battery Pack: 7.2V 3300mAh NiMH rechargeable

 

Flashes per charge: 300 at Full

 

Depth Rating: 330 feet (100 meters)

 

Weight: 2.7 lb